Maintaining a healthy livebearer aquarium
Healthy water leads to healthy fish
Diagnose and treat Livebearer illnesses here.
The secret to keeping healthy livebearers is in keeping the water they live in healthy and suitable for them to live in. The major element in maintaining healthy water is the continuous removal of pollution from the water.
Where does aquarium pollution come from?
Pollution in the livebearer aquarium comes from the fish themselves. Livebearers are continually producing urine and occasionally pooping in their own environment. Also pollution can come from any uneaten food left to rot in the aquarium. Occasionally from the rotting of a dead fish or other water borne creature can cause pollution as well as dead plant material.
You can certainly remove much of the pollutants from the water by siphoning them away and disposing of it. However there is much that will be missed and so you need a filter to remove the remaining pollutants.
A much better automated way of cleaning the fish waste is by relying on biological filtration known as cycling.
Maintaining the correct environment for a livebearer aquarium
Besides keeping the water clean, to maintain a healthy livebearer aquarium you need to maintain temperature control and provide lighting as well as providing suitable water conditions.
Electrical safety in a livebearer aquarium
Most of the equipment used to maintain a healthy livebearer aquarium is powered by electricity. And as you may well know electricity and water make a dangerous combination. So, you must observe certain electrical safety rules as follows:
- Only buy and use electrically certified equipment from a recognised aquarist supplier
- Buy a safety cut out cable that will cut all electricity to the aquarium when there is a fault.
- Unplug all electrical devices in your aquarium when you are working inside the aquarium water or you risk electrical shock. Don’t forget to turn it all on afterwards.
Livebearer fish tank selection
The first thing you need to buy when keeping livebearers is a fish tank. This ideally should be an all glass aquarium bonded together with silicone. Plastic aquariums although lighter are easily scratched and ruin the view of your fish.
Fish need a good supply of dissolved oxygen in the water to breathe. This oxygen comes through the surface of the water. The area of the surface of the water determines how much oxygen will be available for your fish’s use. In other words, the larger the area, the more oxygen and so allowing you to keep more livebearers. Measure about 5 litres of water for every fish as a bare minimum. A 100 litre tank should allow you to keep up to 20 livebearers.
Remember that water in large aquariums can be very heavy and must be placed on a solid floor that can support the weight. If the floor is concrete then it should be fine. However with floor boards you will have to find out where the supporting joists are underneath the floorboards and place your stand on top.
Because livebearers are surface swimmers they tend to be jumpers. This means that livebearers occasionally make a leap to freedom and can end up dead on your living room carpet. So, you need to buy a tight fitting lid to prevent this.
Filtration in the livebearer aquarium
A surprisingly good and effective filtration system is the sponge filter powered by an air pump. Sponge filters are not very powerful but you can use 2 or 3 of them together in the one aquarium. A great advantage of the sponge filter is that they are low maintenance and also they are cheap to buy. All you need to do to clean them is to squeeze them out in a bucket of aquarium water and then swirl them about until most of the excess dirt falls off. Do not remove all the dirt as the biological bacteria that filter the fish waste live in the dirt. Removing the excess dirt will unclog the filter and allow this bacteria to breathe and grow.
Contrary to popular belief, the most important job a filter has to do is not to remove particles and dirt from the water. No, the most important job of a filter is provide a breeding ground for bacteria that break down decaying organic matter into harmless substances.
It takes between 4-6 weeks for the bacteria in a filter to mature to the level where it can remove all the decaying pollution effectively. It is very important that you take care to not kill off the bacteria in the filter. Washing the filter in tap water that contains chlorine will kill the bacteria. Certain medications can also kill of the bacteria. And finally turning off your filter for more than an hour can kill off most of the bacteria in your filter.
Box filters can also be used to filter the aquarium water. These are more powerful but cost more than a sponge filter. They may contain an internal sponge too. The disadvantage is that they are difficult to clean and maintain.
There are even more expensive and powerful external filters that may hang off the back of the aquarium. These may use various filtering material.
All filters ultimately rely on the same method to filter and that is by passing water over a colony of bacteria that have grown inside the mulm that has collected in the filter.
Other methods of removing waste
Despite filters doing such a marvellous job of biologically breaking down waste matter into less harmful waste products, you still need to do some clean up yourself. At least once a week you will have to use a siphon device to sift through the gravel stirring the dirt up to be siphoned into a bucket and thrown away. Siphon away any dead plant material as well.
Uneaten food should be siphoned five minutes after feeding. Dead fish and other creatures should be removed as soon as seen.
Lighting is another important piece of equipment.
Livebearers enjoy bright lighting conditions. However, bright lighting may encourage excessive algae (which is microscopic plant life). Algae is usually healthy for your livebearers who will eat it, but it is an eyesore and may choke off your plants.
The solutions to prevent or remove algae is to keep your aquarium away from direct sunlight and also to reduce the number of hours per day your aquarium lighting is on for.
There are 3 types of bulb that you might use in your livebearer aquarium.
a) incandescent bulbs
b) fluorescent tubes
c) Mercury vapor lamps
Incandescent light bulbs (ie home light bulbs) can be used in fry rearing tanks and quarantine tanks. For most aquariums you should use fluroescent tubes that are widely available and inexpensive. Although expensive, mercury vapor lamps can be economical in very large aquariums where 1 vapor lamp bulb would replace many fluorescent tubes. Vapor lamps are very bright. One vapor lamps is 4 times brighter than a fluoresent tube.
Gravel or sand? The choice is yours.
If you use gravel then you can put plants directly into the gravel with a tablet fertiliser pushed in near the roots. The gravel should be 2 inches deep.
Sand is not so good for plants because it is too compact. Sand may also trap dirt and compact creating stagnant “dead-spots” that may foul the water. To lessen this risk use a shallow layer of 1 inch or less. It is recommended that you place plants in their own little plant pots above the sand.
In the wild livebearers swim in waters where the base is light coloured, so sand is quite comforting for them. You could also buy a light coloured gravel. The lighter coloured base brings out the best in your livebearer’s colours.
Before using gravel or sand in your aquarium you must rinse out dust by placing some sand or gravel a bit at a time in a bucket and running tap water through while swirling it with your hands until the water runs clear.
Plants for a livebearer aquarium
Thriving plants remove the waste products created by the fish. Indeed the plants feed off the decomposed fish waste matter.
Plants also add visual naturalness to an aquarium that is comforting to the fish. The plants create hiding places for females and young livebearers. And finally plants also provide a source of fresh food for your ever hungry livebearers.
Choose plants that like your tap water’s composition in terms of ph and hardness and are hardy aquarium plants. Plants such as Java moss, Java ferns, Cryptocorynes and vallisneria are ideal choices for livebearer aquariums.
What is the correct conditions for livebearers?
Not only do you have to maintain clean water for your aquarium, you also have to provide water of the right composition. Tap water is normally within range of suitability for livebearers. The main factors in water composition are ph level and hardness level of water which can be tested using a test kit bought from your aquarium store. If your tap water has a reading of ph 6.5-8.4 and the hardness reading is above 8dh then that should be acceptable for most livebearers. If the ph and hardness fall out of this range then you need to perform the laborious process of adjusting the water condition. This is best done by having a 200litre barrel and preparing large batches of water at a time.
What exactly is harmful about fish waste? When fish poop and urinate where does this go? What happens to it?
When fish poop and urinate this waste matter decomposes slowly releasing ammonia, which is quite poisonous. In a mature aquarium with a mature filter bacteria breaks down this ammonia into nitrite. In a new aquarium with no bacteria this ammonia builds up and slowly poisons the fish.
How to create a mature filter – cycling.
Nitrite is also poisonous but a second set of bacteria digest nitrite and convert it into nitrate which is relatively harmless. Nitrate is absorbed by plants as a fertiliser.
With this in mind it is essential to buy and use a test kit that measures ammonia and nitrite levels in a new aquarium. You will need to check the ammonia and nitrite daily until they come down to 0.0. In a new aquarium you will have to do daily water changes of between 10-20%. This will reduce the pollutant levels. You have to carry on the daily water changes until the readings hit 0.0 at which point your filter’s bacteria will be mature enough to cope. If you get a particularly high reading during this process do a bigger water change and stop feeding for a day or two.
With all this new found knowledge you should now be in a position to keep your livebearer aquarium healthy in the long term.